The key points of the building ecological energy strategy and design for the renovation of the new German parliament building lie in the technical application and energy strategy of ventilation and lighting. After the reconstruction, the output of carbon dioxide in the building has been reduced by nearly 94%. Through the set path, the air is filtered and cooled into the building, and then the hot air and waste gas are discharged upward by the two-story dome through the building technology; natural lighting is realized by an inverted cone light reflector and a 360-degree tongue-shaped sunshade device, which is equipped with an air pipe and a heat converter, and the tongue-shaped device can rotate according to the change of the solar height angle during the day. The energy strategy adopted in the reconstruction of the building is more radical, including not only the use of solar power, but also the use of renewable “biodiesel” generators to generate electricity, coupled with the storage and recycling of geothermal heat.
More installation method has a double-sided detachable, double-sided detachable installation node, which is a good node for bracket installation. At present, the maintenance of ultra-polymer photovoltaic support bearings is developing rapidly. If there is no such use of pressure and mechanical fixation, it is likely to produce a lot of defects. Such as irregular axial loosening, axial pressure deformation, installation collision, photovoltaic support instability and so on. Erguna connected greenhouse tube structure of a variety of assembly plants can use these pipes, electrical equipment to form a workspace, does not require a large amount of investment. This automatic device mainly relies on the computer as the control center to control the facilities such as skylight, sunshade, heat preservation, wet curtain / fan cooling, spray drip irrigation or drip irrigation, seedbed and so on. Of course, the automatic device can not only rely on the control of the computer, it also has acquisition and control.
If you want to find Shen Qiu car glass, if you want to find Shen Qiu car glass replacement, Shen Qiu car glass repair, go to Zhoukou Yuncheng car glass store. When you are skiing or driving in the mountains, it is helpful to be able to see ahead-but if the temperature or humidity is different, your goggles, glasses and windshield will fog. Although there are many ways to solve this problem with electricity, researchers at the Federal Institute of Technology (ETHZurich) in Zurich have developed a new anti-fog coating that uses light to heat the surface. Removing the fog from the glass is not a new problem, and there are many ways to solve it. The simplest is waterproof paint, which is usually used in glass or sunshades, and some claim to be permanent. Other more active methods are to heat the element in the lens to prevent water droplets from gathering, but this obviously requires a battery.
KOOLIFE car sunshade front windshield sunscreen cloth interior thermal baffle: this sunshade is the front windshield cover, can effectively isolate ultraviolet light and heat, reduce the car temperature, using double ice wire cooling material, has a good cooling effect, suitable for a variety of cars and SUV. The product was evaluated by 50000 people on JD.com Mall, with a comprehensive score and a good rating rate of 98%.
two。 Sunshade. The membrane structure Suzhou parking shed adopts polycarbonate material with high impact resistance, and its strength is about 200 times that of glass. The raw materials are imported from Germany and processed in China. Through the double-sided co-extrusion process, the anti-ultraviolet material (UV) is added, which can effectively block more than 98% of the ultraviolet rays, protect the car surface paint, effectively control the continuous rise of the interior temperature, and in direct sunlight. The temperature in the car can reach more than 60 ℃ and can be effectively reduced to about 40 ℃ after installation. At the same time, it also has flame retardant effect, and can be used normally for more than 30 years in the environment of-30 ℃ to 60 ℃ (137 ℃ thermal deformation). The downcomer is made of high-strength aluminum alloy and has a unique user-friendly design to avoid the second pollution to the car and you when the roof water falls to the ground. The structure is reasonable and easy to clean, and it is convenient for the Suzhou parking shed with membrane structure to remove dirt from the pipe.
In the urban sub-central station comprehensive transportation hub, the main hub function is built underground. On the ground, a landmark building, the “Jingfan” roof, was built. The roof can balance the cooling and heating load and rationally control the indoor light and heat environment by setting a perforated sunshade. It is estimated that the heat load can be reduced by 5.2 million kilowatt hours per year, which is equivalent to the summer cooling capacity of 3200 household air conditioners, and about 486000 kilowatt-hours of lighting electricity can be saved every year.